Assembling a new chair is often viewed as an overwhelming and time-consuming task, but we've kept it simple with the Tallula Recliner from East & Vine.
It will only take four simple steps to set up your recliner and you will not need any tools. Grab a friend -- two people are recommended for assembly.
Follow the steps below and you’ll be ready to relax and enjoy your new recliner in no time!
Step 1
Locate the pack containing the power supply - it will be in a small bag at the back of the chair.
Open the bag and remove the contents, but make sure not to discard packing materials until assembly is complete to ensure all required parts are included and not mistakenly thrown out.
Step 2
Make sure that the chair is upright. It is now time to put the back on. To do so, slide the receiver down onto the posts until you hear both sides click. If you are trying but not hearing a click, lift the back off of the chair and try again, ensuring that the receivers and posts are fully aligned.
Step 3
Next, we will connect the electrical pieces. Using the power supply from Step 1, connect the cords - inserting the post side into the cavity side - then close the plastic black clasp to secure the connection.
Step 4
Finally, we need to connect the power supply to the chair. You will notice a black cavity on the bottom right side of the chair. Insert the corresponding end of the cord into it, then connect the other end of the connected cord to a power supply.
You're ready to use your Tallula Recliner!
You're done!
Position your new recliner in its perfect spot, then enjoy!
For assistance with assembly or installation, parts and customer service, please fill out this form. You may also call 1-757-986-2121 (English only) 6:00 AM – 3:30 PM EST Monday - Friday.
Comentarios